PA / Bellwood
PA · Tap water records
Bellwood tap water, in plain English
Here is what the EPA's own data shows about tap water in Bellwood. According to EPA SDWIS data retrieved June 2026, Bellwood is served by 1 active community water system, together reported to serve about 3,162 people.
As of June 2026, EPA records show 10 violations across the community water system(s) serving Bellwood, going back to the earliest EPA record. None were health-based; the records are monitoring or reporting violations (a required test or report was late or missed). Each is listed by system below, with its status.
What the EPA has on record, by system
Bellwood Boro Auth
3,162 served · surface water · PWSID PA4070009 - Monitoring Total Haloacetic Acids (HAA5): a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 4 times between July 2014 and October 2025. EPA records do not show all of these as returned to compliance.
- Monitoring Surface Water Treatment Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times between January 2016 and August 2017. All have since returned to compliance, per EPA records.
- Monitoring Chlorine: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times between January 2016 and July 2017. All have since returned to compliance, per EPA records.
- Monitoring TTHM: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in July 2014. All have since returned to compliance, per EPA records.
- Monitoring Lead and Copper Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded once in January 2005. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.