AR / Wickes
AR · Tap water records
Wickes tap water, in plain English
Here is what the EPA's own data shows about tap water in Wickes. According to EPA SDWIS data retrieved June 2026, Wickes is served by 1 active community water system, together reported to serve about 2,014 people.
As of June 2026, EPA records show 13 violations across the community water system(s) serving Wickes, going back to the earliest EPA record. 2 of these are classified by the EPA as health-based (a contaminant recorded above the limit the EPA tracks); the rest are monitoring or reporting violations. Each is listed by system below, with its status.
What the EPA has on record, by system
Wickes Waterworks
2,014 served · surface water · PWSID AR0000440 - Health-based Total Haloacetic Acids (HAA5): a health-based violation (a contaminant recorded above the limit the EPA tracks), recorded 2 times in January 2019. The EPA record lists a level of 62 UG/L; the limit (MCL) is 60 UG/L. All have since returned to compliance, per EPA records.
- Monitoring Revised Total Coliform Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 4 times between May 2018 and December 2019. All have since returned to compliance, per EPA records.
- Monitoring Surface Water Treatment Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times in March 2016. All have since returned to compliance, per EPA records.
- Monitoring Coliform (TCR): a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 2 times in February 2012. All have since returned to compliance, per EPA records.
- Monitoring Consumer Confidence Rule: a monitoring or reporting violation (a required test or report was late or missed — not a measured exceedance), recorded 3 times between July 2006 and July 2011. All have since returned to compliance, per EPA records.
What this means
A health-based violation means a contaminant was recorded above the limit the EPA tracks for it. A monitoring or reporting violation means a required test or report was late or missed — not that a contaminant was measured above a limit. “Returned to compliance” means the EPA recorded the issue as resolved.
This page summarizes the EPA's own records and does not assess whether your water is safe to drink. For the most current details, you can verify every record directly with the EPA, and contact your water system with questions.
Source: U.S. EPA Envirofacts SDWIS, retrieved June 2026. Records cover the EPA's full reporting history for these systems. Verify at EPA ECHO.